AI summary
LSPosed module adding codec, quality, sample-rate and LE Audio controls to OPPO/OnePlus earphone panels, with per-headphone presets. Requires root, Android 12+ and compatible LSPosed. Version 2.5.8 updates the experimental LHDC congestion governor and adds a debug-log switch. Features depend on phone and earphone support.
Generated by AI. May contain inaccuracies.
Screenshots
About this app
把原本藏在系统蓝牙设置里的音质选项,直接加到 OPPO / OnePlus 官方「无线耳机」面板中。
它不是一个新的耳机管理 App。安装并启用后,仍然打开你平时使用的官方「无线耳机」页面,就能看到新增的控制项。
能做什么 查看当前蓝牙音频协议,例如 AAC、LDAC、LHDC、LC3。 直接切换播放质量,不用反复进入开发者选项。 切换 44.1 / 48 / 96 / 192 kHz 等耳机实际支持的采样率。 在支持的手机和耳机上开关 LE Audio。 按耳机记住你的协议、播放质量和采样率,重新连接后自动恢复。 在官方耳机主面板和 OneSpace 快捷面板中使用同一套控制。 出现问题时可一键生成反馈包,方便适配不同机型和系统版本。
ADME 欧加耳机音质助手 欧加耳机音质助手:让官方耳机面板更完整
把原本藏在系统蓝牙设置里的音质选项,直接加到 OPPO / OnePlus 官方「无线耳机」面板中。
它不是一个新的耳机管理 App。安装并启用后,仍然打开你平时使用的官方「无线耳机」页面,就能看到新增的控制项。
能做什么 查看当前蓝牙音频协议,例如 AAC、LDAC、LHDC、LC3。 直接切换播放质量,不用反复进入开发者选项。 切换 44.1 / 48 / 96 / 192 kHz 等耳机实际支持的采样率。 在支持的手机和耳机上开关 LE Audio。 按耳机记住你的协议、播放质量和采样率,重新连接后自动恢复。 在官方耳机主面板和 OneSpace 快捷面板中使用同一套控制。 出现问题时可一键生成反馈包,方便适配不同机型和系统版本。 2.5.0 更新 新增「游戏低延迟」总开关(默认开启):关闭后进任意游戏保持当前协议(LHDC 不切 SBC),并置灰官方「游戏模式」与「游戏自动切换 LE Audio」。 新增「游戏自动切换 LE Audio」开关(默认关闭,仅对支持 LE Audio 的耳机显示):进游戏自动切 LC3 低延迟,离开游戏按系统计时恢复;短暂切后台返回不打断;不会关闭你手动开启的 LE Audio。 修复退游戏后系统蓝牙设备页 LE Audio 开关残留、切后台立即退出 LE Audio、游戏内切换偶发外放或断音等问题。 适配 ColorOS 17(无线耳机 17.6.3)的弹窗类名变更,恢复二级菜单与选择弹窗,并修复激活诊断显示。 三种 LHDC 播放质量怎么选 选项 适合谁 实际行为 自适应 大多数用户 使用系统原本的自适应算法,优先保证连续播放,并尽可能提高音质。 连接优先 经常卡顿、距离较远 使用约 500 / 560 kbps 的中档码率,连接更稳。 音质优先 想追求最好音质 按耳机能力固定最高码率(1000 或 900 kbps)。 「音质优先」会按耳机能力选择最高档位(部分耳机上限是 900 kbps)。如果你希望遇到拥堵时自动保护而不是死守最高档,可以到模块诊断页的「链路」页开启实验性「码率拥塞治理器」。
看到这些提示是什么意思 以下提示只会在系统版本 16.0.7 及以上(补丁适用版本线)出现;低于 16.0.7 的系统 LHDC V5 为原生支持、无需补丁,不会出现这些提示,诊断页两个补丁状态会显示绿勾。
「未适配,请联系开发者反馈」:当前手机系统版本还没适配码率补丁,切换「音质优先」可能不会生效。这不是故障,把系统版本和反馈包发给我们即可。 「未完整适配,强行使用可能出现异常卡顿」:码率补丁已生效,但快切补丁缺失,切换档位时可能出现卡顿。可以先继续用,同时把反馈发给我们。 使用条件 手机已 Root,并安装支持 libxposed API 101 的 LSPosed / LSP 管理器。 OPPO / OnePlus / ColorOS 系统,且带有官方「无线耳机」App(包名 com.oplus.melody)。 Android 12 及以上。 本模块只能调用手机和耳机本来就支持的能力,不能让不支持 LHDC、192 kHz 或 LE Audio 的耳机凭空获得这些功能。不同系统版本、无线耳机 App 版本和蓝牙库可能存在差异,未验证组合不保证全部功能可用。
安装方法 从 Release 下载并安装最新 APK。 在 LSPosed / LSP 管理器中启用「欧加耳机音质助手」。 保留模块推荐的四个作用域,不要自行减少: com.oplus.melody com.android.bluetooth com.oplus.wirelesssettings com.android.settings 重启手机。 连接耳机,打开官方「无线耳机」App 查看新增选项。 下载最新版 · 查看源码与技术说明 · 反馈问题
出现问题怎么办 先确认模块已经启用、四个推荐作用域都已勾选,并且重启过手机。如果仍有问题:
打开桌面上的「欧加耳机音质助手」。 点击「开始记录问题」。 回到官方耳机面板,把问题复现一次。 再回到模块页面,点击「生成反馈包」。 提交 Issue 时附上反馈包、手机型号、系统版本、耳机型号和问题截图。 没有给模块 Root 授权也能生成反馈包,但蓝牙底层日志会少很多。诊断页里的「尚未采集」只代表当前记录里还没有对应事件,不代表模块没有生效。
支持作者 如果这个模块对你有帮助,可以扫码请我喝杯咖啡。感谢支持,也欢迎通过反馈一起完善更多设备适配。
What's new
- 2.5.8: Govern LHDC stutter by TX queue overflow and add a debug-log switch The bitrate congestion governor (experimental, off by default) now acts directly on TX queue overflow. When the system Bluetooth stack's TX queue fills, it drops the whole queue, causing a ~225 ms audible gap. Two overflows within 30 s now step down one rung (1000 → 900 → 500). Periods that contained an overflow no longer count as recovery evidence, so the governor does not return to 1000 while the link is still congested. Previously the governor relied mainly on BQR retransmission and no-response rates. When another connection on the phone competes for Bluetooth airtime, those rates can stay normal while audio keeps dropping, so the governor neither stepped down nor stayed down. On PJZ110 + Enco X3 (192 kHz Quality Priority, airtime contention present, 3 min per run), audible gaps fell from 46 to 14, 900 → 500 completed in about 3.5 s, and 500 then played for about 2.5 min with no gaps. Adds a "Debug log" switch to the diagnostics page, off by default. While it is off, high-frequency telemetry such as BQR samples is no longer written to the LSPosed log; only warnings, errors and key status are kept, reducing log writes and battery use. "Start recording issue" still enables full output automatically, so feedback packages are unaffected. In device testing, 3 min of LHDC playback produced no BQR log lines with the switch off. Each queue overflow is recorded as lhdc.link.queue_flush and always written to the LSPosed log; the feedback summary records the debug-log switch state. Upgrade notes and validation limits Under sustained airtime contention the governor stays at 500, trading bitrate for uninterrupted playback. One common source confirmed in this investigation is Phone Link on a PC, which reconnects to the phone over Bluetooth about every 30 s. After turning off its Bluetooth connection on the PC, PJZ110 + Enco X3 played 1000 kbps stably. The rule that requires 3 overflows inside the stream start guard is covered by unit tests only and has not been verified on a device; the rest of the behavior was verified on PJZ110 / ColorOS 17. After upgrading, the high-frequency logs that older versions wrote by default no longer reach the LSPosed log. To investigate an issue, use "Start recording issue" or temporarily enable "Debug log", and turn it off afterwards. After installing or updating the module, restart the Bluetooth process or the phone for the new governor logic to take effect.
- 提交记录 docs: prepare 2.5.8 release notes (65d3581) feat(lhdc): drive the governor from TX queue flushes (3cbbf78) feat(diag): add a debug-log switch and tier module log output (9934b92)
About this version
- Version
- 2.5.8 (42)
- Size
- 4.2 MB
- Requires Android
- 12
- Min SDK
- 31
- Architecture
- arm64-v8a, armeabi-v7a, x86, x86_64
- Downloads
- 29
- Updated
- Nov 19, 2026
- Package
- xyz.melodylsp.codec
Similar apps
Ratings & reviews
- 50
- 40
- 30
- 20
- 10