ScrcpyForAndroid

This application is an Android port of the desktop application Scrcpy. It mirrors the display and touch controls from a remote Android device to an Android device. Scrcpy for Android uses the ADB-Connect interface to connect to the Android device being mirrored.

Instructions to use

- Make sure both devices are on the same local network. - Enable ADB-Connect / ADB Wireless / ADB over network on the device to be mirrored. - Open the Scrcpy-Android app and enter the IP address of the device to be mirrored. - Select display parameters and bitrate from the drop-down menu (1280x720 and 2 Mbps work best). - Enable the Navbar switch if the device to be mirrored has only hardware navigation buttons. - Hit the Start button. - Accept and trust the ADB connection prompt on the target device (check "Always allow from this computer"). Note: some custom ROMs do not show this prompt. - That's all! You should now see the screen of the remote Android device. - To wake up the remote device, double tap anywhere on the screen. - To put the remote device to sleep, cover the proximity sensor and double tap anywhere on the screen. - To bring back the local Android system navbar while mirroring the remote device, swipe up from the bottom edge of the screen.

⚠️ Note

To connect to devices on a public network, the device's public network port must be open for access.

Connection Example

- 192.168.1.222

- host.example.com:5555

-

License

GNU General Public License v3.0